how to draw a 3d room in illustrator

Read Time: 8 mins Languages:

Let's create a retro living room scene in Adobe Illustrator, using unproblematic shapes and Warp Result tool. Nosotros volition utilize only four colors (five if you include the background).

i. Create a Floor Lamp

Step 1

Create a New document, and make a swatch of the colors nosotros're going to use to create the living room elements. These colors are orange (R=226, G=121, B=43), calorie-free brown (R=224, Thousand=198, B=143), blue (R=0, Yard=172, B=157), gray (R=113, 1000=95, B=84), and dark brown for the groundwork (R=71, G=44, B=31).

Step 2

Accept the Eyedropper Tool (I) and click on the calorie-free brownish color in the swatch. Then hit the Rectangle Tool (M) and draw a rectangle. Become to Effect > Warp > Bulge.

In Warp Options, you will see that the Way is prepare to Bulge. Gear up information technology to the Vertical option, and gear up the Bend to -15%. In the Distortion section, the Horizontal option should be gear up to 0% and Vertical to 30%.

Step 3

Create a blue long rectangle under the lampshade.

Step 4

Create a blue rectangle. Make certain that this shape stays selected and go to Effect > Warp > Bulge. In the options window, set up the burl type to Vertical, then gear up the Bend to 15%, Horizontal Distortion to 0% and Vertical Baloney to 40%.

Step 5

Arrange the shapes you've simply made to create a floor lamp.

Footstep six

Set the Stroke to gray and the Fill to null. So select the Line Segment Tool (\), draw a long line and place it as shown in the image beneath. Add a little grayness ellipse to terminate off the pull cord.

Stride 7

Create a rectangle 600px past 300px using the Rectangle Tool (M) and fill it with our background colour.

2. Create an Armchair

Step one

Draw a blue rectangle. Go to Effect > Warp > Curvation. Set the Arch type to Vertical, Curve to -30%, Distortion Horizontal to 0% and Vertical to xxx%.

Footstep 2

Make sure that the resulting shape is selected and simultaneously printing two keys: Shift and Alt. Now motion this shape to the right. Concentrate on the Appearance panel (Window > Appearance and click on the Warp > Arch. Keeping all options the aforementioned, change the Bend by moving the slider to the right to make information technology xxx% (instead of -30%).

Step iii

Draw a blue rectangle between the armchair legs.

Step 4

Draw an orange rectangle, and go to Effect > Stylize > Circular Corners. Set the Radius to 10px. This creates rounded corners for your rectangle (see figure 1, below). Next, go to Effect > Warp > Arc. Set the Arc style to Horizontal. In the Vertical Distortion department, motility the slider to 30 % (see figure ii, below).

Stride v

Create an orange rectangle, and open up Effect > Warp > Arc Upper. Set the arc upper style to Horizontal, and the Bend to 30%. All other options should exist set up to 0%.

Step half dozen

Identify all the armchair parts together. Select the seat (created in Step v), make a copy, and paste it in back (Control-C, Command-B). Change the color of the seat copy to lite dark-brown and using the arrows on your keyboard, move this part upwardly to create the seat outline.

Step 7

Place the armchair in the scene.

3. Create a Java Table

Footstep i

Create a long orange rectangle for the surface of the table. Get to Effect > Stylize > Round Corners and in the popular upwards window, set the radius to 10px.

Footstep 2

Create a bluish rectangle. Then become to Result > Warp > Bulge. Use the following settings in the dialog window: bulge style set to Vertical, Bend to -55%, and the Vertical Distortion to 100%. This is the lower part of the table leg.

Step 3

Create iii blue circles in a line.

Pace iv

Place all the parts together and at that place we have our table.

Step five

Put the tabular array virtually the armchair.

4. Create a Quick Vase with Tulips

Step one

At present to create a vase. Brand a lite dark-brown rectangle using the Rectangle Tool (M). Let's try a new outcome: Warp Effect > Fish. Set the style to Vertical, Curve to -xx%, and Vertical Distortion to thirty%.

Step 2

Use the Line Segment Tool (\) and set the Stroke to gray. Draw three stems for the flowers. Send them to the back so they sit backside the vase, by selecting the stems, correct-clicking the mouse, and choosing Adjust > Send Backward from the options.

Stride three

Now we're going to create the tulips. Accept our orange colour for the fill and make it a bit lighter. Using the Ellipse Tool (L), draw an oval. Copy this oval and paste it to the back (Control-C, Command-B). Motion the new copy to the left and incline it to the left. Make sure that the new copy stays selected and correct-click with your mouse. Printing Transform > Reflect, select the Vertical axis of reflection and press copy. Move the tertiary copy to the correct.

Step 4

For convenience, Group the whole tulip (right-click > Grouping) and brand iii of them. Conform your three tulips on the stems.

Step 5

Place the vase and flowers on the table.

5. Create a Chest of Drawers

Step ane

Create two orange rectangles every bit shown in the prototype beneath. Become to the Pathfinder panel and press the Exclude button.

Step 2

Describe another ii rectangles, using a lite brownish color for the stroke. They are the shelves.

Step 3

Now for the chest of drawer legs. First create a bluish rectangle, and so take the Direct Selection Tool (A) and motion 2 lower anchor points to the left. The lower ballast points should be closer to each other than the upper points are.

Footstep 4

Make ii legs past using Vertical reflection.

Step 5

And put them all together.

Step 6

And, of course, put it in the scene.

6. Decorations for the Interior

Step i

Create a decorative plate. Hitting the Rectangle Tool (M) and depict a low-cal brown rectangle. Go to Effect > Warp > Bulge and prepare the bulge style to Vertical, Bend to 80%, Vertical Baloney to -35%, and then press OK.

Step 2

Create a fruit vase. Make a T-shape figure by using two gray rectangles. Again nosotros will use the Warp Effect. For the upper rectangle, set the Style to Burl, bulge type to Vertical, Bend to lx%, and Vertical Distortion to -100%. For the lower shape use a Burl Mode set up to Vertical, Bend to -20%, and Vertical Distortion set up to 50%.

Step 3

Create a blossom pot. Starting with a green rectangle, use another Warp Effect with the following settings: Style gear up to Bulge, Vertical Curve to twoscore%, and Vertical Baloney to -40%. You can tweak these shapes for all of these decorations, to conform your gustation.

Step 4

Let'due south create a basic establish. Here we will employ the Convert Ballast Point Tool (Shift-C). First, select the Ellipse Tool (50) and create 3 long ovals. Then take the Convert Anchor Indicate Tool (Shift-C) and click on the top and bottom anchor points of every oval.

Step v

And of course, allow's employ the Warp Effect again, but just for the side shapes—don't affect the middle one. Set the left one to: Style: Ascension, Vertical Curve: -40%. And the right one: Mode: Rise, Vertical Curve: 40%. That's it.

Step 6

Place the leaves in the flower pot.

Step vii

Brand a clock, starting with ii rectangles. Get-go a blue rectangle, then a smaller lite brown on. Make their corners rounded using Effect > Stylize > Round Corners with the Radius fix to 5px. Afterwards that nosotros need to adjust the Warp options: Style set to Arc, Vertical Bend set to 0%, and Vertical Distortion set up to 20%. Use these same options for both rectangles.

Step viii

Put greyness marks for the hours twelve, three, six, and nine.

Footstep 9

Create easily for a clock. Start with a circle for the centre and add two pointed ovals, using the Convert Anchor Signal Tool (Shift-C) (at present you know how to practice it). Identify the hands on the clock face up.

7. Position Your Drawers and Decorations

Now our interior should look like this:

8. Create Simple Bookshelves and a Cactus

Step 1

First let'south create our bookshelves. Simply create rectangles in different sizes, inclines and colors.

Footstep 2

Now for a cactus on the bookshelf. Create iii grayness ovals in dissimilar sizes and shades, using the Ellipse Tool (50). Add an orangish rectangle using the Rectangle Tool (M).

For the first oval (from left to right) utilize these Warp options: set up the Warp Style to Burl (Horizontal), Bend to 100%, Horizontal Distortion to -15%, and Vertical Distortion to -60%. For the second oval: set the Warp Style to Burl (Horizontal), Bend to 100%, Horizontal Distortion to 0%, and Vertical Distortion to -60%. And for the third rectangle: ready the Warp Style to Bulge (Horizontal), Bend to 100%, Horizontal Distortion to 15%, and Vertical Distortion to -threescore%.

For the flower pot use another Burl Warp. Gear up the bulge mode to Vertical, Bend to twoscore%, Horizontal Baloney to 0%, and Vertical Distortion to -40%.

Step iii

Add needles. Remove the make full color and apply black strokes. Get to the Stroke panel and cull 0.25pt Weight, and select the Round Cap button. Now take the Pencil Tool (N) and describe the needles of the cactus.

Step 4

Identify the cactus on the bookshelf.

Step 5

And hang the bookshelves on the wall. That'due south it!

Crawly Piece of work, You're At present Done!

Congratulations! Y'all've done a great chore, and you lot've got your very own illustrated living room! Hope it was fun for yous.

I am a totally self-taught digital creative person. I live in the USA with my family, and my two main passions are drawing and fettle.

armstrongsaidgety.blogspot.com

Source: https://design.tutsplus.com/tutorials/how-to-create-an-easy-living-room-scene-in-illustrator--vector-24995

Share this post